Electrical connection
4.1
Screw terminal assignments
Fig. 16
1 Module for analog position feedback
2 Module for digital feedback
emergency shutdown module
3 Module for digital position feedback
the shutdown module
4 Installation kit for digital position feedback, either
proximity switches or 24 V microswitches
5 Same as 4
1) TZIDC-200 only
4.2
Cable entry
Important
The cable terminals are delivered closed and must be unscrewed before inserting the cable.
For the cable entry in the housing, there are two tap holes 1/2 - 14 NPT or M20 x 1.5 on the left
side of the housing.
Fig. 17: Cable entry
1 Pipe plug
2 Cable gland
20 - EN
1)
1)
or service switch of
1)
or terminals of
TZIDC-200, TZIDC-210, TZIDC-220
1)
6 Digital output DO
1)
7 Digital input DI
8 Signal 4 ... 20 mA
9 Grounding screw
CI/TZIDC-200/210/220-EN