Safety Information For Electrical Installation; Operating Safety Information - ABB TZIDC-200 Commissioning Instructions

1.6

Safety information for electrical installation

The electrical connections may only be performed by authorized specialist personnel according
to the electrical plans.
Comply with electrical connection information in the instruction. Otherwise, the electrical
protection class can be affected.
The secure separation of contact-dangerous electrical circuits is only ensured when the
connected devices fulfil the requirements of the DIN EN 61140 (VDE 0140 Part 1) (basic
requirements for secure separation).
For secure separation, run the supply lines separated from contact-dangerous electrical circuits
or additionally insulate them.
1.7

Operating safety information

Before switching on the unit make sure that your installation complies with the environmental
conditions listed in the chapter "Technical data" or in the data sheet.
If there is a chance that safe operation is no longer possible, take the unit out of operation and
secure against unintended startup.
When mounting the unit in areas that may be accessed by unauthorized persons, take the
required protective measures.
CI/TZIDC-200/210/220-EN TZIDC-200, TZIDC-210, TZIDC-220
Safety
EN - 7