Siemens SITRANS AW200 Manual page 13

Intelligent wireless module with voltage supply for field devices wireless hart adapter

Table of Contents

Available languages

–

Of plastic surfaces (e.g. enclosure, sensor element, special coating,

supplementary labels, ...)

–

Of isolated capacitances (e.g. isolated metallic labels)

● Drained battery packs must be disposed of in an environmentally-appropriate

manner.

● Observe the national waste disposal laws.

Installation

● Avoid electrostatic charging (e.g. do not rub dry):

–

Of enclosure and antenna

–

Of connecting cable

–

Of special version with pushbuttons (if present)

● If electrostatic charging is avoided (e.g. through friction, cleaning, maintenance,

high flow of process medium): WirelessHART adapter can be used in gas groups

IIC and IIB.

● WirelessHART adapter: label with warning "Avoid electrostatic charging".

● Observe the directives for connecting intrinsically-safe circuits.

● To retain the degree of protection of the enclosure:

–

Screw the cover tight.

–

Mount the cable entry appropriately.

● Following alignment of the enclosure (rotating): tighten the locking screw again.

● Protect the connecting cable between the WirelessHART adapter and the field

device against tension and friction (e.g. electrostatic charging resulting from flow

of process medium).

WirelessHART Adapter SITRANS AW200

A5E02777167-05, 01/2017

Direct installation on the

field device

General safety instructions

Remote installation with

cable connection

Table of Contents