Replacing a track
Use the numeric keys or
the replacement track and press the
The selected track replaces the track in the step and the
unit returns to program input mode.
Erasing a track
Press the remote control
track from the program.
All following tracks are moved one step forward in the
Playback time display mode
You can set what is shown on the display when in playback
time display mode.
1 Press the main unit
key) to cycle through the three
types of time display.
The currently selected display mode is shown above the
keys to select
key to remove the
key (or the
5 – Playing Back CDs
The elapsed time of the current track is shown.
The remaining time of the current track is shown.
"TOTAL" and "REMAIN" indicators
The total remaining time is shown.
When stopped, the total time is always shown
regardless of whether the "TOTAL" or "REMAIN"
indicators are shown.
When a data CD is loaded, the remaining time and
total remaining time during playback and the total
time when playback is stopped are not shown. (Only
the number of tracks or the track number is shown;
" ––" appears in place of the time display.)
In programmed playback mode, the program total
elapsed time and remaining time are shown.
The time display mode setting is retained even if the
power is turned OFF.
Text information display mode
Text information can be shown on the display. ID3 tag
information can be shown for data CDs and CD text
information can be shown for audio CDs. This information
cannot be shown if it is not recorded in the disc or file.
1 To show text information, press the
key while holding the
key on the remote control). Press
again to cycle through the available text information
An indicator for the currently selected display mode
is shown above the main display. The contents shown
differ during playback and when paused and between
data CDs and audio CDs.
[Audio CD/Data CD title]
[Data CD file name]
The track title is shown.
The track artist name is shown.
key on the main unit (or