Status Led - Bicker Elektronik UPSI-IP-1 Series User Manual

UPSI-IP-1 series | UPSI- IP-2 series

15 Status LED

2 x flash, pause 1,5s
3 x flash, pause 1,5s
4 x flash, pause 1,5s
5 x flash, pause 1,5s
1 Hz flash  power fail
Always on
Quick flashing
Status: Capacity for start is required, state charging
Status shutdown: Waiting for shutdown completion
Status reboot: Output is switched off and
time runs until restart (Reboot)
Status: No battery recognized / battery defect
Status: Backup mode
Status: System OK
Status: output voltage too low
 UPS will be shut down
47