Mounting; Mounting The Device On The Din 35 Rail; Figure 9: Mounting The Device On The Din 35 Rail; Figure 10: Mounting The Device On The Din 35 Rail - WAGO EPSITRON 787-1668 Series Manual

26

Mounting

Pos : 41 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Monti eren - D emontieren/M ontier en - Übersc hrift 1 @ 3\mod_1225446744750_21.doc x @ 24900 @ 1 @ 1
4 Mounting
Pos : 42 /Serie 787 (EPSITRON)/M ontier en/Montage 787- 16xx @ 11\mod_1317296048899_21.doc x @ 80170 @ 22 @ 1
4.1 Mounting
Pos : 59 /Serie 787 (EPSITRON)/M ontier en/Montage 787- xxxx @ 11\mod_1317296048899_6.doc x @ 80169 @ 22 @ 1
The device is designed for mounting on a DIN 35 rail.
4.2

Mounting the Device on the DIN 35 Rail

Figure 9: Mounting the device on the DIN 35 rail

1. Tilt the device slightly.
2. Place the device with its DIN rail guide on the top edge of the DIN rail.
3. Slide the device all the way down.

Figure 10: Mounting the device on the DIN 35 rail

4. Press it down against the bottom fastener until you hear it lock into place.
5. Lightly shake the device to ensure that it is correctly locked into place.
787-1668 Electronic Circuit Breaker
EPSITRON®
Manual
Version 1.1.0