BY VOICE RECOGNITION
(IF EQUIPPED)
Calls can be made by giving a voice
command.
This can be operated while driving.
1
Press the talk switch.
The actual design and button position will
differ depending on the vehicle. For
details, refer to vehicle "Owner's Manual".
2
After a beep sounds, say the command
of your choice.
Voice commands are marked with
®
1. Bluetooth
HANDS-FREE SYSTEM OPERATION
3
Say the command displayed on the
screen.
If a desired outcome is not shown, or if no
selections are available, perform one of
the following to return to the previous
screen:
• Say "Go back"
• Touch "Go Back"
To
cancel
"Cancel", or press and hold the talk
switch.
INFORMATION
●
Voice guidance for the voice recognition
system can be skipped by pressing the
talk switch.
●
The voice recognition prompt can be set
to on or off when "Voice Prompts
(on/off)" is touched. This setting can
also be changed on the "Guidance
Settings" screen. (See page 95.)
●
When "Voice Prompts (on/off)" is
touched, voice recognition will be tem-
porarily suspended. Press the talk
switch again.
●
Voice guidance can be canceled by set-
ting voice prompts to off. Use this setting
when it is desirable to say a command
.
immediately after pressing the talk
switch.
voice
recognition,
3
touch
79