Toyota Prius V 2014 Owner's Manual page 105

2
When this screen is displayed, perform
a device discovery
®
Bluetooth device.
3
Input the passcode displayed on the
screen into your Bluetooth
A passcode is not required for SSP
(Secure Simple
®
Bluetooth phones. Depending on the
type of Bluetooth
connected, a
registration may be displayed on the
®
Bluetooth phone's screen. Respond and
operate the Bluetooth
to the confirmation message.
If you want to cancel it, touch "Cancel".
®
If the Bluetooth
®
has a Bluetooth
be registered at the same time.
4
When the connection is completed,
this screen is displayed.
Once you have registered it, the system
automatically connects to your Bluetooth
device every time you start your vehicle.
from your
®
device.
Pairing) compatible
®
phone being
message confirming
®
phone according
phone to be registered
audio function, this can
INFORMATION
●
For details on device discovery for your
®
Bluetooth
®
Bluetooth phone's user's guide.
●
When you
®
Bluetooth audio will disconnect.
●
If the Bluetooth
phone and Bluetooth
will register phone and audio simulta-
neously. If an on-screen message
appears, follow the message and regis-
ter either or both Bluetooth
or Bluetooth
REMOVING A Bluetooth
DEVICE
1
Touch "Remove" to remove your
®
Bluetooth
2
Select the device to remove.
®
INFORMATION
●
When you delete a Bluetooth
the phonebook data will be deleted at
the same time.
1. SETUP OPERATION
phone, refer
register your
®
device has Bluetooth
®
audio functions, it
®
phone and/
®
audio functions.
®
device from the system.
®
to the
phone,
®
5
phone,
99