Voice Command System Operation; Voice Command System; Operation - Toyota Prius V 2014 Owner's Manual

MICROPHONE
The microphone is directed toward the
driver. It is unnecessary to speak di-
rectly into the microphone when giving
a command. Passengers may not be
heard as clearly by the microphone.
INFORMATION
●
Wait for the confirmation beep before
speaking a command.
●
Voice commands may not be recognized
if:
• Spoken too quickly.
• Spoken at a low or high volume.
• The windows are open.
• Passengers are talking while voice
commands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned
towards the microphone.
●
In the following conditions, the system
may not recognize the command prop-
erly and using voice commands may not
be possible:
• The command is incorrect or unclear.
Note that certain words, accents or
speech patterns may be difficult for the
system to recognize.
• There is excessive background noise,
such as wind noise.

1. VOICE COMMAND SYSTEM OPERATION

VOICE COMMAND SYSTEM

OPERATION

1
Press the talk switch.
The voice command system is activated.
Press the talk switch to stop the cur-
rently played prompt and skip to the
next dialog step.
In case of an activated speech recog-
nizer waiting for input, press the talk
switch to restart the speech recognizer.
(The recognizer drops the previous
input and waits for new input from the
user.)
2
After a beep sounds, say the desired
command or touch the desired com-
mand.
: This icon will be displayed if the user
can speak a command.
: Touch to adjust the volume of the
voice guidance volume.
6
185