3. Insert cables K1, K2 and K3 (only for OP 019).
4. Close the cabled TCU mounting bracket unit and attach it using the four knurled screws
②
Figure 3-1
TCU 30.3
Manual, 09/2017, A5E40874197
3.2 Mounting the TCU on the operator panel front with mounting bracket
.
①
2 x hinge catches
②
4 x knurled screws for attaching the mounting brackets to the operator panel front
③
2 x mounting brackets
④
10 mm clearance
Mounted TCU (example with OP 012) in front, side and rear view
Mounting
21