Siemens SINUMERIK 840D sl TCU 30.3 Manual page 58

Networking
5.4 Service and diagnostics
Figure 5-8
● "Show logfile of remote devices" shows the log file of the other devices in the network:
The syslog messages of devices in the system network which send syslog messages by
broadcast, such as NCU 7x0, ...
● "Modify operator panel settings" opens another submenu, see next section.
● Calibrate touch screen" is only active if there is a touch screen. This menu item recalibrates
the touch screen.
● "Reboot" initiates a restart of the TCU.
Note
Lines that are longer than space available wrap round onto the next line so that you do not
have to scroll across. When this occurs, the line has a right-facing arrow at its right edge.
58
TCU menu: Local log file
TCU 30.3
Manual, 09/2017, A5E40874197