Listening To Fm Radio - iHome iWBT5 Instruction Manual

Bluetooth dual alarm clock radio with apple watch charging
Table of Contents

Advertisement

L I S T E N I N G T O F M R A D I O
Extend FM antenna for best reception.
Tunin g a nd P l ay i ng the Radio
1.
Press and release the
release the Mode Button as needed to cycle through BT and FM radio modes.
2. When FM mode is selected, press the + or – Buttons to tune the radio to a
desired station. The current radio frequency appears in the bottom of the
display. Press and hold the + or – Buttons briefly to scan for the next clear
station.
3. To memorize a station as a preset:
A. Press the Play/Pause/Presets Button as needed to step through the 6
presets (P1 - P6) to the number you wish to assign, and then hold the
Play/Pause/Presets Button until the radio frequency begins flashing in
the display.
B. Press the + or – Buttons to tune the radio to a desired station. Hold
briefly to have the radio autoscan/search for the next clear station.
C. Press the Play/Pause/Presets Button. Two confirmation beeps will
confirm the setting and the preset number you wish to assign. Repeat
steps A-C to preset up to 6 stations.
4. To listen to a preset station, use the Mode Button to select FM mode, then
press the Play/Pause/Presets Button to choose the desired preset.
5. Press the
or
USING THE RADIO IN OTHER COUNTRIES
Di erent regions of the world use di erent FM radio frequency steps and ranges.
You will need to select the one that matches the standards in your region (USA,
EUROPE, JAPAN, AUSTRALIA, or CHINA). The default setting is USA; if you live
in the US, you may skip this section.
1.
While unit is OFF, press and hold the Mode Button for about 10 seconds
until the region flashes in the display and a beep sounds.
Press the + or – Buttons as needed to set the display to your region: USA,
2.
EUROPE, JAPAN, AUSTRA (Australia), or CHINA.
Press and release the Mode Button (or no button within 10 seconds) to exit
3.
the radio frequency setting mode. Two beeps will confirm radio frequency
setting.
Power Button to turn on the unit, then press and
Button on the unit to adjust the system volume.
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents