Introduction
About Making and Receiving Calls
Your TANDBERG 150
MXP
is capable of
making and receiving simple telephone
calls in addition to its main objective; video
meeting calls.
Calls can be made by means of speed dialling
(five presets available for immediate dialling);
by means of the Phone Book (which typically
consists of My Contacts and a Corporate
Phone Directory) as well as manual dialling
(entering the "number" manually).
When dialling manually you may also define
settings applying to your call. For presets
(Speed Dialling and Phone Book usage) these
call settings will be a part of each preset
entry, hence there will be no need to define
these every time you make a call.
Privacy.
There are some aspects of privacy
regarding incoming calls that you may want to
consider.
In particular we are thinking of such things
as: Should the microphone, as default, be
switched off, so that the far end will be unable
to hear you until you physically switch the
microphone back on? This is described in the
Adminstrator's Guide (separate document).
What about the the camera? Should the
camera also remain switched off until you
physically switch it back on? If so, press the
Camera Off
key whilst outside a call (must be
done every time you want it).
Using TTY for Text Exchange
You may hook up a TTY (Text telephone) to
MXP
the 150
. The TTY is a device allowing
hearing- or speech impaired people to
communicate by typing and reading messages
– see
Audio Settings
in the
Adminstrator's
Guide
for more.
Table of
Unpacking &
Operating
Operating
Contents
Installation
principles
Principles
D 14067.01
05.2007
The Icons Appearing on the Screen
Microphone Off.
This indicator is shown when the microphone
is turned off. Press the
back on.
Privacy.
This indicator is shown when the
keypad is activated. No camera images are sent from your
system when the privacy indicator is displayed. Press the
key again to deactivate the feature.
Volume Off.
This indicator is shown when the volume is turned
off. Press
Volume +
to turn the volume back on.
Secure Conference, AES.
shown when AES encryption (Secure Conference) is active.
Secure Conference, DES.
DES encryption (Secure Conference) is active.
Not Secure Conference.
the initialization phase for encryption. During this period the call is
not secure.
Your TANDBERG 150MXP Keypad at a Glance
1
2
abc
3
def
4
5
ghi
jkl
6
mno
7
8
pqrs
9
tuv
wxyz
0
a/A
Alphanumerical
Cursor keys, OK and
keypad
Cancel keys
Making
Making
Video
Calls Using
Calls
Phone Book
Mic Off
key again to turn the microphone
Privacy
key on the
Privacy
This double padlock indicator is
This padlock indicator is shown when
This open padlock indicator is shown during
Soft keys, call
keys and picture
keys
Call register,
Administrator
settings and Help
Microphone Off,
Privacy On (Camera
Off), and Volume
Control
Details on the keys can be
found on the next page.
Making
Phone Book
Incoming
Telephone
Details
Calls
Calls
The Different Parts of Your 150MXP
Camera.
The camera has manual tilt and focus. Turn the
lens to adjust focus.
TIP!
Selfview
Press
first to see your video picture.
Tilt the camera by manually adjusting the
the wheel to the right of the lens.
Use the
cap
of the unit to cover the
lens when the unit is not
in use. The camera lens
cap protects the lens and
also assures you from
involuntary broadcasting
Microphone.
Located
of your video image.
at the top of the unit.
Camera
Screen
Loudspeaker
Handset.
Handset is an
optional device.
Contact your
TANDBERG
representative
for more
Keypad.
The keypad contains all
information.
the keys you need to control the
system.
The soft keys are context sensitive keys, whose
functions will change in accordance with what you
are doing. In some contexts they are used for Speed
Dialling, in other contexts they will be used for other functions,
Calling More
Video Meeting
Contact
Than One
Features
Information
TANDBERG 150 MXP
TANDBERG 50
MXP
USER GUIDE
USER GUIDE
Tilt Angle
with
Camera lens
located at the rear
Selfview
key