Vnc Settings - TANDBERG 770 MXP User Manual

5.3.9

VNC Settings

VNC Settings is necessary when using a VNC presentation. Please see chapter,
Presenter and VNC, for more information on how to use VNC.
Address The IP-address of the PC with the VNC software installed. To find the IP-
address of the PC, place the mouse pointer on the VNC program icon in the
lower right corner of the Windows taskbar. You can also select Command
Prompt from the Startup-menu\Run and type cmd then enter. This will open a
command window and from here. Type "ipconfig" and press enter.
Display The display number for VNC is 0 and upwards. If you are using WinVNC,
Number double-click on the icon on the taskbar to view WinVNC properties. This
number should correspond with Display Number in this menu.
Password Enter the same password as specified in WinVNC properties. The password
will be shown as asterisk signs (*) the next time you enter the menu.
General Use
PC Soft
153