Download  Print this page

Sony MPE-200 Installation Manual page 19

Multi image processor
Hide thumbs

Advertisement

3. LED-495 board
D3
D4
<Switch >
n
S1 can be operated on the front panel.
Ref No.
Address
S1
(Side B)
<LED >
m
. D1 and D2 light for the INFORMATION LED on the front panel.
. D3 and D4 light for the power LED on the front panel.
Ref No.
Address
Name
D1
(Side B)
Message
D2
(Side B)
Message
D3
(Side B)
Pow/Stb
D4
(Side B)
Pow/Stb
*1:
Status
Power not supplied
Standby status
Unit starting up
Firmware starting up
Operation normal
Shutting down
Unit shutting down
Warning status
Error status
MPE-200
D2
D1
S1
Side B
Name
Function
Power
The system starts when pressed during standby.
The system shuts down when pressed for 2 seconds during operation.
The power turns off forcibly when pressed for 5 seconds during operation.
Indication color
Blue
Red
Green
Red
Pow/Stb LED
Message LED
Off
Off
Lit (red)
Off
Blinking (green)
Off
Lit (green)
Off
Lit (green)
Lit (blue)
Lit (green)
Off
Blinking (red)
Off
_
Blinking (blue)
_
Blinking (red)
Function
Displays the system status in combination with
*1
Pow/Stb LED.
Displays the system status in combination with
Pow/Stb LED.
*1
Displays the system status in combination with
Message LED.
*1
Displays the system status in combination with
*1
Message LED.
Normal state
Lights on
Lights off
Lights on
Lights off
1-11 (E)

Advertisement

loading

  Also See for Sony MPE-200

  Related Manuals for Sony MPE-200