Table of Contents
Advertisement
1-6. Matching Connectors and Cables
Use the following connectors, cables or equivalents when connecting cables to the unit.
Panel indication
Connector name
NETWORK-1
RJ-45 modular jack
NETWORK-2
RS-232C
D-sub 9-pin, Male
USB
USB Type A
IN 1 to 4
BNC, 75 Z
OUT1 1 to 4
REF IN
*1 : Conforms to the IEEE 802.3 Ethernet 10BASE-T/100BASE-TX/1000BASE-T standards.
*2 : The following crimp contact is required for the socket.
AWG#24 to #26 : 1-563-814-11
1-7. Input and Output Signals of Connectors
The input and output signals of the connectors at the rear panel are as follows.
IN 1 to 4 HD SDI Video Input (BNC) (4):
Signal format:
Conforms to SMPTE 292M
Video format:
1080/59.94i, 1080/50i, 1080/23.98PsF, 4:2:2 (Y, Cb, Cr)/10 bit
0.8 V p-p ± 10 %
Level:
75 Z, unbalanced
Input impedance:
Signal transfer distance: 100 m (BELDEN 1694 or equivalent used)
OUT1 1 to 4 HD SDI Video Output (BNC) (4):
Signal format:
Conforms to SMPTE 292M
Video format:
1080/59.94i, 1080/50i, 1080/23.98PsF, 4:2:2 (Y, Cb, Cr)/10 bit
0.8 V p-p ± 10 %
Output amplitude:
75 Z, unbalanced
Output impedance:
REF IN (BNC):
75 Z, terminated
HD tri-level sync/SD black burst
Return Loss : _40 dB
1-6 (E)
Matching connector and cable
Name
*1
_
D-sub 9-pin, Female
Connector 9-pin, Female
Junction Shell 9-pin
USB cable
Belden 1694 coaxial cable
Sony part No.
_
*2
1-563-815-21
1-563-375-11
_
_
MPE-200
Advertisement
Table of Contents
