V-ZUG 296 Installation Instructions
V-ZUG 296 Installation Instructions

V-ZUG 296 Installation Instructions

One-family household heat pump dryer

Advertisement

Installation instructions
Heat pump dryer
One-family household
The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in the order
specified.
Validity
These installation instructions apply to the model: 296
Transport
Transport the appliance in an upright position only or, if necessary, tilted on its left side (front view). Being transported any other
way can cause damage to the appliance!
Allow the appliance to stand for about 2 hours in the normaloperating position.
Front, upside down
Front
Front
1
J296.113-0
25.6.08 ITH
Back
Side

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 296 and is the answer not in the manual?

Questions and answers

Summary of Contents for V-ZUG 296

  • Page 1 The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in the order specified. Validity These installation instructions apply to the model: 296 Transport Transport the appliance in an upright position only or, if necessary, tilted on its left side (front view). Being transported any other way can cause damage to the appliance! Allow the appliance to stand for about 2 hours in the normaloperating position.
  • Page 2: Identification Plate

    Installation instructions J296.113-0 Heat pump dryer 25.6.08 ITH One-family household Identification plate Open the appliance door and the cover. – The identification plate is located bottom right behind the cleaning cover. Installation accessories supplied The necessary installation accessories are located in the drum. Article Article no.
  • Page 3: Electrical Connections

    Installation instructions J296.113-0 Heat pump dryer 25.6.08 ITH One-family household Free-standing position If a tumble dryer and a washing machine are positioned side by side, keep a distance of min. 5 mm between installation plates and min. 3 mm to walls. Positioning in a niche Centre the installation plate in the niche.
  • Page 4: Connect Condensate Drain

    Installation instructions J296.113-0 Heat pump dryer 25.6.08 ITH One-family household Connection cable 230 V~ 50 Hz, 10 A 3 × 1 mm Colour code L1 brown blue yellow/green Combined connection tumble dryer / washing machine (models 250–258, 267) Washing machine brown Mains black...
  • Page 5: Washer-Dryer-Combination

    Installation instructions J296.113-0 Heat pump dryer 25.6.08 ITH One-family household Washer-dryer combinations Can be connected to a double drain trap. Washer-dryer-combination with combi drainage set W5.4917 with drainage into fixed upright outflow pipe Installation side by side with combi drainage set W5.4917 5.

Table of Contents