Bosch MIC IP ultra 7100i Installation Manual page 10

10 en | Safety
FCC suppliers Declaration of Conformity
MIC IP ultra 7100i
MIC IP starlight 7100i
Note: Changes or modifications not expressly approved by Bosch could void the user's
authority to operate the equipment.
FCC & ICES Information
(U.S.A. and Canadian Models Only)
This device complies with part 15 of the FCC Rules. Operation is subject to the following
conditions:
–
–
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These
limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and
radiates radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his expense.
Intentional or unintentional modifications, not expressly approved by the party responsible for
compliance, shall not be made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult the dealer or an experienced
radio/television technician for corrective action.
Responsible party
Bosch Security Systems, Inc.
130 Perinton Parkway
14450 Fairport, NY, USA
www.boschsecurity.us
See also
–
2019-07-03 | 0.17 |
this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause
undesired operation.
Best Practices for Outdoor Installation, page 51
High-definition 4K PTZ camera
High-definition PTZ camera
Installation Manual
MIC IP ultra 7100i │ MIC IP starlight 7100i
Bosch Security Systems