Replacing An Auxiliary Light Bulb - Yamaha Super Tenere ABS XT1200ZE Owner's Manual

Periodic maintenance and adjustment
Replacing an auxiliary light
bulb
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove the windshield by remov-
ing the screws.
2
1. Windshield
2. Screw
2. Remove the cover by pulling it
outward.
1. Cover
3. Remove the panel by removing
the screws and the quick fastener
screw.
EAU58971
2
1
1. Panel
2. Screw
2
3. Quick fastener screw
4. Remove the headlight unit cover
2
1
1. Headlight unit cover
2. Bolt
5. Remove the headlight unit bolts,
6-35
1
by removing the bolts.
1
then pull the headlight unit slightly
out, making sure that it remains
supported. NOTICE: Be careful
not to pull the headlight leads.
[ECA16811]
3
2
6
2