Brake Pedal - Yamaha Super Tenere ABS XT1200ZE Owner's Manual

Instrument and control functions
When the vehicle starts moving,
the unified brake system is re-en-
abled.
 The unified brake system does not
function when the brake pedal is
applied alone or before the brake
lever is applied.
The brake lever is equipped with a
brake lever position adjusting dial. To
3 adjust the distance between the brake
lever and the throttle grip, turn the ad-
justing dial while holding the lever
pushed away from the throttle grip.
Make sure that the appropriate setting
on the adjusting dial is aligned with
the " " mark on the brake lever.
1
2
1. Brake lever
2. Brake lever position adjusting dial
3. " " mark
4. Distance between brake lever and throttle
grip
4
3

Brake pedal

1. Brake pedal
The brake pedal is located on the right
side of the motorcycle. To apply the
rear brake, press down on the brake
pedal.
TIP
Resistance and vibration may be felt in
the brake pedal while the front brake is
being applied and the unified brake
system is enabled, but this does not in-
dicate a malfunction.
3-26
EAU49483
1