Yamaha Super Tenere ABS XT1200ZE Owner's Manual page 102

Periodic maintenance and adjustment
2
1. Headlight unit
2. Headlight unit bolt
1
6
1. Headlight lead
6. Remove the auxiliary light bulb
socket (together with the bulb) by
turning the socket counterclock-
wise.
1. Auxiliary light bulb socket
7. Remove the burnt-out bulb by
pulling it out.
1
1
2
1. Auxiliary light bulb
8. Insert a new bulb into the socket.
9. Install the socket (together with
the bulb) by pushing it in and turn-
ing it clockwise.
10. Install the headlight unit by install-
ing the bolts, and then tightening
them to the specified torque.
Tightening torque:
Headlight unit bolt:
7 N·m (0.7 kgf·m, 5.2 lb·ft)
11. Install the headlight unit cover by
installing the bolts.
12. Install the panel by installing the
screws and the quick fastener
screw.
13. Install the cover.
14. Install the windshield by installing
the screws, and then tightening
them to the specified torque.
WARNING! A loose windshield
6-36
1