Yamaha Super Tenere ABS XT1200ZE Owner's Manual page 27

Push the menu switch "MENU" to
switch the display between the follow-
ing functions. The display changes
each time the switch is pushed.
 Grip warmer adjusting function
 Information
function
 Damping force adjusting function
 Preload adjusting function
TIP
The preload adjusting function will ap-
pear only when the vehicle is stopped
with the engine running.
The following pages contain explana-
tion of the grip warmer and information
display functions. See page 3-37 for an
explanation of the preload and damp-
ing force adjusting functions.
Adjusting the grip warmer
This vehicle is equipped with grip
warmers, which can only be used
when the engine is running. There are 4
grip warmer settings.
Setting
Off
Low
Middle
High
To increase the grip warmer tempera-
ture, push the "
switch. To decrease the grip warmer
temperature, push the "
select switch.
Instrument and control functions
display selection
Display
" side of the select
" side of the
NOTICE
 Be sure to wear gloves when
using the grip warmers.
 If the ambient temperature is 20
°C (68 °F) or higher, do not set
the grip warmer to the high set-
ting.
 If the handlebar grip or throttle
grip becomes worn or dam-
aged, stop using the grip warm-
ers and replace the grips.
Selecting the information display
1 2
GEAR
N
A.TEMP ˚C
25
C.TEMP ˚C
Lo
TIME TRIP
0:06
1. Information display
2. Display–1
3. Display–2
4. Display–3
There are 3 information display pages.
Push the select switch rotate between
them.
You can select and arrange which
items will be shown on each informa-
tion display page. (See page 3-20.) The
following items are available:
 odometer
 tripmeters
 fuel reserve tripmeter
 estimated traveling range
 elapsed time
 air intake temperature
 coolant temperature
3-13
ECA17931
GEAR
3
N
TRIP-1 km
5.0
TRIP-2 km
7.0
ODO km
20
GEAR
N
RANGE
11
FUEL AVG
12.3
CRNT FUEL
12.3
3
4
km
km/L
km/L