• (8) ³⁄₈" wall anchors, bolts and washers to mount frame and bowl to wall (minimum pull-out rating of 1,000 lbs.) • ½" Nominal copper tubing for hot and cold supplies and 1½" NPT drain piping Bradley • 215-1509 Rev. G; ECN 13-08-025 4/9/2014...
Page 3
57" (1445) 77" (1956) 22" (mm) (559) 9½" (241) 21½" (546) *39" (991) *33½" (851) *29½" *17½" (749) (445) *Subtract 4" from vertical dimensions for compliance with ADA guidelines for children’s use. Bradley • 215-1509 Rev. G; ECN 13-08-025 4/9/2014...
AND COLD SUPPLIES STUB OUT 2" ³⁄₈ " WALL ANCHORS, (8) PLACES MIN. PULL-OUT STRENGTH 1000 LBS. PER ANCHOR *Juvenile Height Mounting: Subtract 4" from vertical dimensions for compliance with ADA guidelines for children’s use. Figure 1 Bradley • 215-1509 Rev. G; ECN 13-08-025 4/9/2014...
Page 6
STUB OUT 2" 4" (102) FLOOR ½" NOMINAL COPPER TUBING FOR HOT AND COLD SUPPLIES STUB OUT 2" ³⁄₈ " WALL ANCHORS, (8) PLACES MIN. PULL-OUT Figure 1b STRENGTH 1000 LBS. PER ANCHOR Bradley • 215-1509 Rev. G; ECN 13-08-025 4/9/2014...
Page 7
NOTE: The anchors will be used to mount the Express MG-3/BIR3 bowl and frame to the wall. ® 1½" NPT DRAIN STUB OUT 2" ½" NOMINAL COPPER TUBING FOR HOT AND COLD SUPPLIES OR TEMPERED SUPPLY. STUB OUT 2" Figure 2 Bradley • 215-1509 Rev. G; ECN 13-08-025 4/9/2014...
Page 8
END CAP LEFT " BOLTS AND WASHERS ³⁄₈ (6) PLACES ¼" - 20 SCREWS AND FINISHING WASHERS (6) PLACES STAINLESS STEEL TERREON ® ACCESS PANEL END CAP RIGHT FRONT VIEW Figure 3 Bradley • 215-1509 Rev. G; ECN 13-08-025 4/9/2014...
Page 9
FRAME SPRAYHEAD " BOLT ³⁄₈ AND WASHER BOWL TERREON ® ¼"-20 x ½" END CAP (R) PAN HEAD SCREWS AND TERREON ® WASHERS END CAP (L) (4) PLACES Figure 4 BACK VIEW Bradley • 215-1509 Rev. G; ECN 13-08-025 4/9/2014...
Page 10
NAvIGATOR THERMOSTATIC MIXING vALvE SLOT IN FRAME FLEXIBLE SUPPLY HOSE Figure 5a Figure 5b FLEXIBLE SUPPLY HOSE Single Tempered (TO SOLENOID Supply BRACKET) TO SUPPLY LINE TEMPERED LINE ADAPTER Figure 5c (S39-804) Bradley • 215-1509 Rev. G; ECN 13-08-025 4/9/2014...
Page 12
3. Using cover, turn cartridge gently until desired water temperature is reached. Do not turn past stops as this may damage unit. Push cover down and tighten screw. 4. Reinstall panel to frame with the five Torx-head screws provided (see Figure 3 on page 8). Figure 8 Bradley • 215-1509 Rev. G; ECN 13-08-025 4/9/2014...
* Use of brand names is intended to indicate a type of cleaner and does not constitute an endorsement. ** It is emphasized that all products should be used in strict accordance with package instructions. • Repair kit: A repair kit is available from Bradley to repair/patch the Terreon bowl and shelf. Contact ®...
ASSISTANCE). SPRAYHEAD MOUNTING BOLTS (5) END CAP (RIGHT) STAINLESS STEEL (PART NUMBER vARIES WITH ACCESS PANEL COLOR OF UNIT. CONTACT 186-1262. YOUR LOCAL BRADLEY REP. FOR ASSISTANCE). Figure 8 Other replacement parts Bradley • 215-1509 Rev. G; ECN 13-08-025 4/9/2014...
OPEN VALVE CLOSED VALVE as outlined above, the problem may be with the circuit board. Make a note of the numbers printed on the circuit board, then contact your Bradley representative for assistance. Bradley • 215-1509 Rev. G; ECN 13-08-025...
Page 18
125-165 O-RING, #2-013 SOLENOID VALVE W/CIRCUIT BOARD CLOSED BODY (S07-082) THRU BODY (S07-082A) CIRCUIT BOARD (S83-178) PAN-HEAD SCREW 6-19 x 3/4" (160-451) VALVE ASSEMBLY CLOSED BODY (S07-072) THRU BODY (S07-072A) Figure 13 Bradley • 215-1509 Rev. G; ECN 13-08-025 4/9/2014...
Page 19
198-014 Check Valve* 132-051 Retaining Ring* 118-319 Valve Body 146-079 U-Clip * Included with Prepack S65-326 Tempered Line Adapter Option Part no. S39-804 (replaces S59-4000 if tempered line is used) Strainer (173-028) Bradley • 215-1509 Rev. G; ECN 13-08-025 4/9/2014...
Need help?
Do you have a question about the MG Series and is the answer not in the manual?
Questions and answers