Electrical Safety Instruction (For Appliances With Bsi Plug Only) - Respekta GKE 144A+ Operating And Installation Instructions

English
Electrical Safety Instruction
For appliances with BSI plug only
THIS APPLIANCE MUST BE EARTHED.
IF THE MAINS LEAD OF THE APPLIANCE
IS FITTED WITH A PLUG:
FUSE REPLACEMENT
If the mains lead of this appliance is fitted with a BS
1363A 13 amp fused plug, to change a fuse in this type
of plug use a A.S.T.A. approved fuse to BS 1362 type
and proceed as follow:
1. Remove the fuse cover (A)
2. Remove the fuse (B)
3. Fit replacement fuse into plug
4. Refit the fuse cover
B
IMPORTANT:
The fuse cover mast be refitted when changing a fuse
and if the fuse cover is lost the plug must not be used
until a correct replacement is fitted.
Correct replacements are identified by the colour
insert or the colour embossed in words on the base of
the plug. Replacement fuse cover are available from
your local electrical store.
fi160929
GENERAL USER'S MANUAL REFRIGERATORS
A
4
CONNECTION TO A REWIREABLE PLUG
If the fitted plug is not suitable for your socket outlet,
then it should be cut off and disposed of in order to
avoid a possible shock hazard should it be inserted
into a 13A socket elsewhere.
A suitable alternative plug should then be fitted to the
cable.
The wires in this mains lead are coloured in
accordance with the following code:
BLUE
BROWN
YELLOW & GREEN
E
YELLOW & GREEN
N
BLUE
Connected to a
typical 13 amp plug
1. The YELLOW & GREEN wire must be
connected to the terminal in the plug which
s marked with the letter E
or by the Earth symbol
or coloured green or yellow & green
2. The BLUE wire must be
connected to the terminal which is marked with
the letter N
or coloured black
3. The BROW wire mast be
connected to the terminal which is marked with
the letter L
or coloured red
GB
"NEUTRAL" (N)
"LIVE" (L)
"EARTH" (E)
N
BROWN
CABLE CLAMP