Installation Preparation For Integration In Fitted Kitchen; Specifications - Respekta GKE 144A+ Operating And Installation Instructions

Built-in double door regfirgerator

Hide thumbs

Table of Contents

Available languages

English

Prepare the kitchen furniture before installing the appliance according to the following

specifications:

1. Adequate ventilation must be

ensured for properly function of the

cooling system.

Namely through an air inlet

opening (A) in the base of at least

200 cm2 and an exhaust air

opening (B) of at least 200 cm2,

through which the waste heat

generated by the refrigerator can

escape.

2. Install a grounded wall socket at

a maximum height of 2100

mmoutlet (C)

3. The minimum distance between

the back of the appliance and the

back of the kitchen furniture (D)

mast be

38 mm.

If the mains plug is no longer

accessible after installation of the

device, a disconnection device

must be installed on the installation

side. The disconnecting device is a

switch with a contact opening of at

least 3 mm, including circuit

breakers and fuses as well as

contactors.

If cabin shelves (E) are arranged

above the refrigerator, they must also

be cut out accordingly.

If the refrigerator is placed on a cabinet

shelf (F), this must also be cut out

according.

fi160929