Home Function ( Menu =>Function => Home Function) - Honeywell HWC-S363-RV Instruction Manual

Select the Function and then move the joystick to the right to access Function menu.
1.1 Home Function ( MENU =>Function => Home Function)
After Home Function item has been selected, follow the directions below to set Home
function.
Function : TOUR/ PRESET/ PATTERN/ AUTOSCAN
Number : - - -
Time : 10~240 Seconds
Operation : Enable/ Disable
The Home function applies to the predefined functions such as Preset, Tour, Pattern, or
Scan function after the keyboard controller has been idle for a programmed time.
Follow the steps below to program the Home function:
1. Select the camera number by pressing No. and CAM
2. Press MENU to display the main menu on the monitor.
3. Moving the Joystick to the right on "Function".
4. Enter Home Function menu by moving the Joystick to the right.
Main Menu
Function
Screen
Camera
Data
Setup
Exit
Function
Home Function
Preset
Pattern
Scan
Tour
Run Function
Exit
HOME FUNCTION
Function : TOUR
Number : ---
Time : 060 sec
Operation : Disable
Save And Exit
18
PTZ SPEED DOME CAMERAS