Data ( Menu => Data); Factory Default (Menu => Data => Factory Default); Erase Data (Menu => Data => Erase Data) - Honeywell HWC-S363-RV Instruction Manual

4 Data ( MENU => Data)
4.1 Factory Default (MENU => Data => Factory Default)
Programmed data goes back to initial state as ex-factory
4.2 Erase Data (MENU => Data => Erase Data)
This function erases programmed data in the EEPROM of the selected dome camera.
Origin offset value is not affected.
CAUTION: Unless you download the data into a safe place, all the data in the selected
dome camera will be lost. (Refer to Download/ Upload data function in the
Keyboard Configuration utility)
DATA MENU
Factory Default
Erase Data
Exit
Factory Default
ARE YOU SURE ?
CANCEL
OK
Erase Programmed Data
ARE YOU SURE ?
CANCEL
OK
←
←
36
PTZ SPEED DOME CAMERAS