Operation; Using The Appliance - Miele SmartLine Tepan Yaki CS 7632 Operating And Installation Instructions

Using the appliance

This SmartLine element is equipped
with electronic sensor controls which
react to finger contact. For safety reas-
ons, in order to switch the appliance on,
the On/Off  sensor needs to be
touched for a little longer than the other
sensors.
Each time you touch a sensor, an aud-
ible tone sounds.
Only the printed On/Off  symbol is
visible when the SmartLine element is
switched off. The other sensor controls
light up when the SmartLine element is
switched on.
Malfunction due to dirty and/or
covered sensor controls.
If the sensor controls are dirty or
covered this could cause them to fail
to react, to activate a function or
even to switch the appliance off
automatically (see "Safety switch-
off"). Placing hot pans on the sensor
controls/indicators can damage the
electronic unit underneath.
Keep the sensor controls and indic-
ators clean and do not place any-
thing on top of them. Do not place
hot pans on them.
The Tepan plate has two cooking zones
which can be switched on and regu-
lated independently of one another. The
entire area can be used when cooking
large quantities of food. For smaller
quantities, the front element can be
used to cook the food whilst the rear
element can be used to keep food
warm with the keeping warm func-
tion .

Operation

19