Table of Contents
Advertisement
The SmartLine element has to be
switched on if you wish to use the timer.
A duration of between 1 minute (:)
and 9 hours 59 minutes (:) can be
set.
Times of up to 59 min are shown in
minutes (0:59) and times of more than
60 min are shown in hours and minutes.
Times are entered in the order of hours,
followed by minutes in tens and then
units.
Example:
59 min = 0:59, entry: 5-9
80 min = 1:20, entry: 1-2-0
After the first number has been entered
the timer display will light up constantly.
After the second number has been
entered, the first number will move to
the left. After the third number has been
entered, the first and second numbers
will move to the left.
The timer can be used for the following
two different functions:
– For setting the minute minder
– For automatically switching off a
cooking zone/heating element/Tepan
plate zone.
The functions can be used at the same
time. The shortest time is always dis-
played and the sensor control
(minute minder) or the indicator light for
automatic switch-off pulsates.
Touch the or sensor control if you
want to show the remaining times
counting down in the background. If
more than one switch-off time is pro-
grammed, touch the sensor control
repeatedly until the corresponding in-
dicator light pulsates.
Minute minder
The minute minder is set using the nu-
merical keybank for the (front) left cook-
ing zone.
To set the minute minder
Touch the sensor.
The timer display will start to flash.
Select the time you require.
To change the minute minder dura-
tion
Touch the sensor.
Select the time you require.
To delete the minute minder duration
Touch the sensor until : ap-
pears in the timer display.
Timer
23
Advertisement
Table of Contents
