Table of Contents
Advertisement
Safety features
Overheating protection
All the induction coils and cooling ele-
ments for the electronics are fitted with
an overheating protection mechanism.
Before the induction coils or cooling
elements get too hot, the overheating
protection mechanism cuts in in one of
the following ways:
Induction coils
– The set power level will be reduced.
– The cooking zone switches off auto-
matically. flashes alternately with
in the timer display.
You can use the cooking zone again as
usual when the error message has gone
out.
Cooling elements
– The set power level will be reduced.
– The cooking zone switches off auto-
matically.
The affected cooking zone can only be
used again as usual once the cooling
element has cooled down to a safe
level.
30
The overheating protection mechanism
can be triggered by:
– Fat or oil being heated on a high
power level.
– Insufficient ventilation of the under-
side of the Tepan plate.
– A hot cooking zone being switched
on after an interruption to the power
supply.
If, despite removing the cause, the
overheating protection mechanism trig-
gers again, contact Miele Service.
Advertisement
Table of Contents
