Attaching The Cable Clamp Belt (Supplied) - Sony HDC2500 Operation Manual
Hd color camera
Hide thumbs
Also See for HDC2500:
- Brochure (4 pages) ,
- Operation manual (84 pages) ,
- Technical information (73 pages)
Table of Contents
Advertisement
Attaching procedure of the BKW-401
1
Turn the arm of the rotation mechanism assembly of
the BKW-401 in the direction of the arrow in the
following illustration.
Next, using a hexagonal wrench 3 mm across flats,
remove the bolts (M4 × 8) together with the washers,
to separate the rotation mechanism assembly from
the viewfinder front-back positioning mechanism
assembly.
2
In the same manner as step 1, remove the viewfinder
shoe of the camera from the front-rear positioning
mechanism.
D
3
Using the two bolts (M4 × 8) and the washers removed
from the camera in step 2, attach the rotation
mechanism assembly of the BKW-401 to the camera.
Hexagon
socket bolts
(M4 × 8)
D
4
Adjust the front-rear position so that the camera
handle does not interfere when you rotate the BKW-
401 arm upwards.
Not to interfere
D
Attaching the Cable Clamp Belt
(Supplied)
You can secure the camera cable to the camera by attaching
the supplied cable clamp belt.
1
Insert the belt bracket into hole A or B of the cable
clamp belt.
B
Belt bracket
A
2
Remove two +B3×5 screws and a blind screw shown
in the figure below from the camera.
Blind screw
×
+B3
5 screws
Page 21
Advertisement
Chapters
Table of Contents
