Engineer Operation; Logging Into Engineer Mode - andrews CWH 30/201 Operating Instructions Manual

4.0 ENGINEER OPERATION

The features available at "Expert" level are intended for use by a competent service engineer. The follow-
ing section details options/screens that are available to the service engineer in additions to the options/
screens available at commissioning and end user level.

4.1 LOGGING INTO ENGINEER MODE

Using the Graphical User Interface (GUI), screen, move the control knob to select "Setup" page on the navigation bar
and press the control knob.
In the work area , use the control knob to select "Expert" fi eld and press the control knob to select
Select "Engineer" using the control knob and press the control knob to select it. Press control knob to continue into
commissioning mode.
Enter password '10001' by rotating the control knob, and then pressing the control knob to input each number.
Engineer
Regional settings
Special operations
Settings
Expert
Expert
Select user level
Enter password
_ _ _ _ _
Expert
Select user level
Enter password
1
_ _ _ _ _
31
Back
Engineer
Back
Engineer
Back
MAXXfl o EVO