Setting Dhw Operating Mode - andrews CWH 30/201 Operating Instructions Manual

2.5 SETTING DHW OPERATING MODE

Changing the operating mode is achieved using the operation switch on the front of the facia (see below).
OPERATION SWITCH
When operation switch is set to position O (STANDBY), DHW operating mode should be OFF (see example below)
When operation switch is set to position I (ON), DHW operating mode should be ON (see example below)
NB: If the operating mode is not ON when the operation switch is set to I (ON), change the operating mode to ON
using the control knob and push to select. Test that the operating mode changes when the position of the operation
switch changes from ON to STANDBY and back to ON.
End user
Domestic hot water
Operating mode
Temporary
Nominal set point
Time program
Domestic Hot Water
Operating mode
Temporary
Nominal set point
Time program
14
Off
---
---
00 12 24
On
...
28 C
o
00 12 24
MAXXfl o EVO