Wlap Mode Led Display - Symbol Spectrum24 AP-4131 Product Reference Manual

4.9.1

WLAP mode LED display.

When in the WLAP mode the chart below signifies the APs LED indicator
status.
For the IEEE 802.11 protocol and APs using firmware version
above only.
1. After power up, system initialization begins:
2. When a WLAP begins a full scan:
3. When one or more WLAPs are found, but still in full scan state:
4. When the WLAP is in functional state, but one or more WLAP connections
AP-4131 Access Point Product Reference Guide
LED
Power
Wired LAN Activity
Wireless LAN Activity
LED
Power
Wired LAN Activity
Wireless LAN Activity
LED
Power
Wired LAN Activity
Wireless LAN Activity
are not in Forward state:
LED
Power
Wired LAN Activity
Wireless LAN Activity
State
On
Off
Blinks slowly
State
On
Off
Blinks slowly
State
On
Off
Blinks slowly
State
Blinks regularly
Blinks if activity occurs
Blinks slowly
Hardware Installation
or
199