Configuring Type Filtering; Adding Filter Types; Removing Filter Types; Controlling Type Filters - Symbol Spectrum24 AP-4131 Product Reference Manual

Configuring the AP

2.10 Configuring Type Filtering

Packet types supported for the type filtering function include the 16-bit DIX
Ethernet types. The list can include up to 16 types.

2.10.1 Adding Filter Types

The Type Filtering screen provides a facility to add types to the list.
1. Select
2. Enter the packet type.

2.10.2 Removing Filter Types

The Type Filtering screen provides a facility to remove types from the list.
1. Highlight the packet type using the UP/DOWN-ARROW keys.
2. Select

2.10.3 Controlling Type Filters

Set the type filters to forward or discard the types listed. To control the type
filtering mode:
1. Select
2. Select
3. Press the SPACE BAR to toggle between the
4. Select
5. The system prompts
120
.
.
type filtering and press ENTER to confirm the choice.
information to all APs with the same Net_ID (ESS).
This option saves configuration changes for the current AP , sends two
WNMP messages to all other APs on the Known APs table to update their
configuration and issues a reset once the configuration is modified.
Users can perform this option only among the same hardware platforms
and firmware version.
Type .
from the Main Menu.
.
or press to save the Type Filtering Setup
AP-4131 Access Point Product Reference Guide
, or