Symbol Spectrum24 AP-4131 Product Reference Manual page 89

3. Verify the values set to reflect the network environment.
4. Select
5. Select
6. The system prompts
7. Select
AP-4131 Access Point Product Reference Guide
Change them as needed.
or to register settings by writing changes to NVM.
Selecting displays a confirmation prompt.
information to all APs with the same Net_ID (ESS).
This option saves the configuration changes for the current AP , sends two
WNMP messages to all other APs on the Known APs table to update their
configuration and resets after the configuration has been modified.
Users can perform this option only among the same hardware platforms
and firmware version.
Type .
return to the previous menu.
or press to save the RF Configuration
to disregard any changes made to this screen and
Configuring the AP
79