Performing Pings - Symbol Spectrum24 AP-4131 Product Reference Manual

Configuring the AP
16. Verify the accuracy of the version number on the System
17. Press CTRL+D to end the Telnet session.

2.16 Performing Pings

An access point sends a ping packet to an MU and waits for a response. Use
pings to evaluate signal strength between two stations. The other station can
exist on any AP interface.
This ping operates at the MAC level and not at the ICMP (Internet Control
Message Protocol) level.
No pings returned or fewer pings returned than sent can indicate a
communication problem between the AP and the other station.
152
The AP displays the Main Menu.
Summary screen.
AP-4131 Access Point Product Reference Guide