Adding Allowed Mus; Removing Allowed Mus - Symbol Spectrum24 AP-4131 Product Reference Manual

2.8.3

Adding Allowed MUs

The Access Control List screen provides a facility to add MUs to the ACL.
1. Select the Set Access Control List option from the Main Menu to display:
2. Use the UP/DOWN-ARROW keys to toggle between
3. Press
4. Enter the MAC address.
Users can enter MAC addresses without colons.
5. Select
6. The system prompts
7. Select
2.8.4

Removing Allowed MUs

The Allowed Mobile Units screen provides a facility to remove MUs from
the ACL.
1. Highlight the entry using the UP/DOWN-ARROW keys.
2. Press
AP-4131 Access Point Product Reference Guide
. Select
. The AP prompts for a MAC address.
information to all APs with the same Net_ID (ESS).
This option saves the configuration changes for the current AP , sends two
WNMP messages to all other APs on the Known APs table to update their
configuration and resets after the configuration has been modified.
Users can perform this option only among the same hardware platforms
and firmware version.
Type .
return to the previous menu.
or press to save the Adding Allowed MU
to disregard any changes made to this screen and
Configuring the AP
and
115