Inserting The Sim Card - Mennekes eMobility- Gateway Operating And Installation Manual

Connection
Fig.: 10. Connecting the cable for the Downgrade input
f Uncover the cable and strip approx. 10 mm.
f Connect the individual cores to terminals 3 and 4.
f Install external switching contact according to require-
ments.
Î "5.7.3 Downgrade input"
12
3 4

5.8 Inserting the SIM card

The charging infrastructure can be connected to a
Backend system via mobile telephony. For this purpose, a
SIM card must be inserted in the ACU.
Data is transferred when communication takes
place via mobile communications networks.
Therefore, to avoid high charges, only use SIM
cards from mobile telephony contracts in which
the data volume is not limited (e.g. flat-rate
plans).
Preparing the SIM Card
Before inserting the SIM card into the device, it may be
necessary to deactivate the PIN. A mobile telephone with-
out a SIM lock is required for this purpose.
Inserting the SIM card
T
T
ATTENTION
Damage to components
Damage to components or device due to electrostatic dis-
charge.
f Touch an earthed metal part before inserting the
SIM card.
Fig.: 11. SIM 1 slot
f Insert the SIM card in slot "SIM 1".
f Click the SIM card into place by applying slight pres-
sure.