About This Document; Service; Warning Information; Symbols Used - Mennekes eMobility- Gateway Operating And Installation Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 19
1.

About this document

This manual refers to the eMobility-Gateway, hereinafter
referred to as the "device".
This manual is intended for use by the operator and quali-
fied electrician(s). It contains instructions for safe operation
and installation. Tasks that may only be carried out by a
qualified electrician are specially marked. The configuration
is described in the installation manual MENNEKES ACU /
SCU.
Observe all additional documentation for the use of the
device. Keep all documents for later reference and pass
these on to the new operator.
The German version of this manual is the original manual.
Manuals in other languages are translations of this original
manual.
Copyright © 2018 MENNEKES Elektrotechnik
GmbH & Co. KG
1.1

Service

If you have questions concerning the device, please con-
tact MENNEKES or your responsible service partner. On
our website under "Search for Partners" you will find quali-
fied contacts in your country.
To contact MENNEKES directly, please use
the form in "Contact" on
https://www.chargeupyourday.com/
Please have the following information ready to hand for
quick processing:
„ Type designation / serial number
(see type plate on the device)
Further information about electromobility can
be found on our website under "FAQs".
https://www.chargeupyourday.com/faqs/
2
1.2

Warning information

Warning of personal injury
T
T
DANGER
This warning notice indicates imminent danger that will
result in death or severe injuries.
T
T
WARNING
This warning notice indicates a dangerous situation that
may result in death or severe injuries.
T
T
CAUTION
This warning notice indicates a dangerous situation that
can result in minor injuries.
Warning of material damage
T
T
ATTENTION
This warning notice indicates a dangerous situation that
may result in property damage.
1.3

Symbols used

Only a qualified electrician may carry out opera-
tions marked with this symbol.
This symbol indicates an important note.
The symbol indicates additional, useful informa-
tion.
f This symbol marks a prompt for action.
„ This symbol marks a listing.
Î This symbol is used to refer to another section in this
manual.
This symbol is used to refer to another document.

9
This symbol is used to point out a result.

Advertisement

Table of Contents
loading

Table of Contents