Alignment - CPI GRYPHON Operation And Service Manual

Alignment

After installation, ensure that there is a small gap (2-4mm) between the lever on the vending
machine and the return lever on the coin manager.
•
Depress the coin return lever on the machine door, confirm that it fully opens the
accepter lid on the coin manager and then returns smoothly, without holding the door
open.
•
Check the alignment of the coin input chute and the cashbox. Insert some coins to
ensure that they enter the cashbox and exit into the return cup.
•
Ensure that the coin chute does not rest on or open the Acceptor assembly lid.
•
Align, adjust and test as necessary to ensure coins are properly routed before
continuing.
6
GRYPHON OPERATION AND SERVICE GUIDE