CPI GRYPHON Operation And Service Manual page 5

5. Tighten screws if necessary, being careful not to over-tighten, and close the acceptor
assembly. The lower mount is difficult to access with a large screw driver.
6. Remove the cassette. Lift it by the handle and pull towards you.
7. Fill the cassette with coins, ensuring the coins are inserted into the proper tubes.
8. Return the filled cassette to the Gryphon and insure it is properly seated.
9. Connect the MDB Cable.
a. If you have a bill acceptor, connect the MDB harness from the Gryphon to the
bill acceptor's "Y Connector".
10. Tuck any excess cabling inside the vending machine, ensuring that the cables do not
interfere with the Vending Machine or Gryphon's operation.
11. Restore power to the vending machine.
5
GRYPHON OPERATION AND SERVICE GUIDE