Solid State Logic XLogic Delta-Link MADI HD User Manual page 7

Mains Isolation and Over‐Current Protection
An external disconnect device is required for this equipment; a detachable power cord, as fitted to
this equipment, is a suitable disconnect device. Note that the socket outlet used for the detachable
power cord should be installed near the equipment and should be easily accessible.
An external over‐current protection device is required to protect the wiring to this equipment
which must be installed according to current wiring regulations. The fusing or breaking‐current is
defined in the environmental specification in Section 5.0 of this manual. In certain countries this
function is supplied by use of a fused plug.
CE Certification
Note that the majority of cables supplied with Solid State Logic equipment are fitted
with ferrite rings at each end. This is to comply with current European CE regulations
and these ferrites should not be removed. If any of the equipment metalwork is
modified in any way the CE certification status of the product may be adversely affected.
Note that a frame or chassis terminal stud (functional earth) has been fitted to this equipment to
provide a convenient low impedance bonding point for interconnected equipment, should it be
required.
FCC Certification
The XLogic Delta‐Link MADI HD unit has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his
own expense.
Instructions for Disposal of WEEE by Users in the European Union
The symbol shown here is on the product or on its packaging, which indicates that
this product must not be disposed of with other waste. Instead, it is the user's
responsibility to dispose of their waste equipment by handing it over to a designated
collection point for recycling of waste electrical and electronic equipment. The
separate collection and recycling of your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household waste disposal
service or where you purchased the product.
XLogic Delta-Link MADI-HD
Page 7 of 24