Pro Tools Software; General Information - Solid State Logic XLogic Delta-Link MADI HD User Manual

7. Pro Tools Software

General information

The Delta‐Link MADI HD can work with Pro Tools HD systems running on a Windows PC or
MAC OS X computer.
Using the Delta‐Link MADI HD with the Pro Tools software is generally straightforward.
However, there are a few points to be aware of:
•
The Delta‐Link MADI HD appears in the Pro Tools software as four Digidesign 192 I/O
units, except when operating at 176.4 or 192kHz, in which case it appears as two Digidesign
192 I/O units.
•
The MADI inputs and outputs appear in the Pro Tools software as Analogue or Digital
(AES/EBU or ADAT) inputs and outputs belonging to these four Digidesign 192 I/O units.
Therefore, you will not find any MADI inputs or outputs listed in the Hardware Setup
page of the Pro Tools software under menu: Setup|Hardware. Please use the inputs and
outputs that are listed, regardless of their denomination ‐ they are really your MADI inputs
and outputs ‐ and do not select ʺNoneʺ.
The screenshot below was made using a Pro Tools HD2 system with a single Delta‐Link MADI HD
. It shows as 192 I/O peripherals (top left). All the inputs and outputs that listed belong to this
single unit:
XLogic Delta-Link MADI-HD
Page 17 of 24