Synchronization; Pro Tools Hd Card; Delta-Link Madi Hd; Wordclock / Frameclock - Solid State Logic XLogic Delta-Link MADI HD User Manual

Madi interface for digidesign pro tools hd ystems
Hide thumbs Also See for XLogic Delta-Link MADI HD:
Table of Contents

Advertisement

XLogic Delta-Link MADI-HD

5. Synchronization

Pro Tools HD card

The Pro Tools HD card is designed to operate as a Clock Slave, locking to a clock reference signal 
provided by the audio unit connected to its primary port. The interface unit can define the Sample 
Rate internally, or can itself be synchronized to an external reference signal (e.g., WordClock). 
 
Whenever  the  user  selects  a  Sample  Rate  setting  in  the  PC  or  Mac  software,  the  corresponding 
command is sent to the interface unit. 

Delta-Link MADI HD

The  Delta‐Link  MADI  HD  ,  like  the  Pro  Tools  HD  card,  is  designed  to  operate  as  a  Clock  Slave. 
Once  the  card  and  Delta‐Link  MADI  HD    are  connected  together,  they  can  be  seen  as  a  unit 
requiring  an  external  clock  reference  signal.  However,  this  unit  now  has  MADI  ports,  instead  of 
the ʺDigital and Analogʺ connections to other devices provided by Pro Tools interfaces. 
 
Although  a  reference  signal  is  embedded  in  the  Primary  port,  the  MADI  connection  requires  a 
separate WordClock signal. Therefore, the Delta‐Link MADI HD  is equipped with a WordClock 
input connector. 
 
Depending on the type of unit that is connected to the MADI port, the Sample Rate will no longer 
change  automatically  when  a  setting  is  selected  in  the  PC  or  Mac  software  (because  there  is  no 
command channel). Therefore, the Sample Rate needs to be set manualy at both ends (in the Pro 
Tools software and on the hardware connected to the MADI port). 

WordClock / FrameClock

The WordClock input can translate WordClock or FrameClock to the required Sample Rate. 
 
The ʺLOCKʺ LED on the front panel indicates reception of a stable signal. 
 
NOTE: When a ʺmultiplexingʺ mode is used for digital audio transfers, the frame rate of the audio 
clock is equal to the audio sample rate at up to 48kHz, half of the audio sample rate at up to 96kHz 
or  a  quarter  of  the  audio  sample  rate  at  up  to  192kHz..  For  instance,  at    44.1kHz,  88.2kHz  or 
176.4kHz,  the  frame  rate  is  44.1kHz.  At  48kHz,  96kHz  or  192kHz,  the  frame  rate  is  48kHz.  The 
term ʺFrameClockʺ denotes such an audio clock signal that is proportional but not always equal to 
the sample rate. 
 
Page 12 of 24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents