Configuring Cm-Rc-01 With The Best Software; Capacity Control Crii With The Best Software - Bitzer 4PTEU-6LK Technical Information

• Select IQ MODULE CM-RC-01.
• Click the C button.
ONNECT
• Enter Bluetooth password. Factory setting from firm-
ware version 2.6.58.00 on: "8670", previous ver-
sions: "2"
The C menu appears with the M
ONFIGURATION
window. The compressor module is now connected to
the mobile device.
9.2 Configuring CM-RC-01 with the BEST
SOFTWARE
In its state of delivery, the compressor control module
CM-RC-01 is configured for use with the compressor in
question.
Check all settings in the C
change them, if necessary. Check in particular the fol-
lowing entries:
• M
OTOR START FUNCTION
of the motor contactors, see chapter Motor connec-
tion, page 9.
• R . Select "None" (in future select "R744").
EFRIGERANT
• D
ATE
• T
IME

9.3 Capacity control CRII with the BEST SOFTWARE

In the C menu, further parameters must be
ONFIGURATION
set in the C
ONTROL FUNCTIONS SUBMENU
page 13):
• N
UMBER OF CAPACITY REGULATORS
• Setting the /
MINIMUM MAXIMUM CAPACITY LIMIT
2.8.229.0 SP2 with firmware version 2.3.242.00. The
released compressor range is fixed as standard.
However, the minimum capacity limit can be in-
creased and the maximum capacity limit reduced.
KT-102-1
S
AIN
menu and
ONFIGURATION
because of time relay control
(see figure 13,
(max. 2).
from BEST
ETUP
Fig. 13: Configuration of CRII in the BEST SOFTWARE
13