Installing The Control Panel; Installing Into The Control Console - Sony CCP-9000-C Installation Manual

1-4. Installing the Control Panel

1-4. Installing the Control Panel

1-4-1. Installing into the Control Console

n
When installing the control panel into the control console,
be sure to install it with two persons or more.
Install the control panel by following the procedure
described below.
Tool required
. Screws (P5 x 6): 6 pcs
1. Remove the six module covers on both sides.
2. Remove the six screws and remove the three caps (L)
and (R) each on both sides in the direction of the
arrow.
Cap (L)
PSW3 x 6
1-6
Module covers
PSW3 x 6
Cap(R)
3. While lifting up the control panel with one person, and
holding it with another person, and then install the
control panel into the control console.
4. Fix the control panel to the control console by tighten-
ing the six screws.
P5 x 6
5. Install the caps (L) and (R), and module covers in the
reverse order of removal.
P5 x 6
CCP-9000