Installing The Application - Sony CLIE GEAR PEGA-MSB1 Operating Instructions Manual

Installing the Application

When you try to perform Bluetooth communications for the first time
after inserting this Bluetooth Module in your CLIÉ handheld, you
need to install the Bluetooth Preferences utility in your CLIÉ
handheld. You can install the utility from the supplied CD-ROM.
Note
Before installation, it is necessary to attach a cradle to the CLIÉ handheld and
connect it to a Windows computer. For details on how to connect the CLIÉ
handheld to the computer, see the manual of your CLIÉ handheld.
1
Perform a soft reset on your CLIÉ handheld.
For details on how to perform a soft reset, see the manual of your
CLIÉ handheld.
2
Insert the supplied CD-ROM in the CD-ROM drive of
your Windows computer.
The installer starts and the initial screen appears.
Tip
If the installer does not start automatically, double-click [setup](setup.exe).
You can find it in the CD-ROM.
3
Proceed with the installation, following the installer's
instructions.
On the user name selection screen, select a user's name.
Notes
• If you want to use more than one CLIÉ handheld, you need to install this
application in each CLIÉ handheld.
• The Bluetooth Preferences utility does not support the high resolution
mode. It is recommendable to enable the High Resolution Assist function
on the Preferences settings screen of your CLIÉ handheld.
GB
12