System Connection; System Connection Of The Mvs-8000 Series - Sony CCP-9000-C Installation Manual

1-10. System Connection

1-10. System Connection

1-10-1. System Connection of the MVS-8000 Series

Configure the MVS-8000 series system connection referring to the connection example as
shown below.
Connection example
Ethernet switch
(*1)
Reference video
signal (*2)
DATA CTRL REMOTE 1
Switcher Processor Pack
MVS-8400/8300/8200
(*1) : Connect each LAN (CTRL, DATA) to the separate Ethernet switches respectively.
However, a single Ethernet switch can be used for connecting each LAN.
For information about Ethernet switches that can be used in an MVS system, contact your local Sony Sales Office/Service Center.
For detailed information about setting up the Ethernet switch, refer to the documentation supplied with the switch.
(*2) : Terminate the system with the 75Z terminators supplied. The 75Z terminators are supplied with the equipment.
1-26
Reference video signal (*2)
Ethernet switch
(*1)
DATA
Reference video
signal (*2)
Device Control Unit Pack DCU-8000
VTR
CTRL EDITOR
DATA LAN
Editing Control System
CTRL
REMOTE
BKS-R series
HDS-X series
DDR
DME Processor Pack
MVE-8000
BVE-9100
PERIPH
Center Control Panel
MKS-9011/9012
PERIPH
Reference video
signal (*2)
Audio mixer
Cross cable
BNC cable
CCP-9000