Installing The Sportpilot; Step 1 - Remove The Steering Wheel - Raymarine SportPilot Owner's Handbook Manual

81057_6.book Page 38 Tuesday, February 21, 2006 2:21 PM
38

4.6 Installing the SportPilot

Step 1 – Remove the steering wheel
1. Turn the wheel all the way over to starboard lock. You MUST do this
so you can tighten the retaining nut at the end of installation (see
without damaging the SportPilot.
2. Remove the steering wheel hub.
3. Holding the steering wheel still, use a suitable socket or the supplied box
spanner to remove the retaining nut and washer.
4. Carefully remove the steering wheel.
5. Remove the original woodruff key. Retain the woodruff key as you will
need to use it during a later stage of installation.
Steering
wheel hub
ST60 Tridata Instrument Owner's Manual
137.5 mm (5.4 in)
238.5 mm (9.4 in)
Retaining
Washer
nut
100.5 mm (4.0 in)
D1355-2
page 45
)
Woodruff
key
D1363-2